If it is not in the port range from 1-4, you will need to right click the “USB Serial Port”, then click “ Properties”, then click the “Port Settings” tab, then click “Advanced”. Using the drop down menu, select a COM Port Number from 1-4. If the COM port number is 1, 2, 3 or 4, you will not need to configure the port. Go to Control Panel > Device Manager and find the device under “Ports (COM & LPT). It should be called “USB Serial Port” and you will see the COM port number that was assigned to it. 4. After the driver installation is complete, we will need to setup the COM Port for the interface. (You may need to right click the installer and Run as Administrator). Run the “CDM 2.08.30 WHQL Certified” installer to install the required Windows Drivers for the cable. A quick walkthrough of the process to download and install the Ross-Tech VCDS (VAG-COM) diagnostic.ģ. Extract and Open the “CDM 2.08.30 WHQL Certified for VAG 409.1” folder that you downloaded. Windows will automatically detect the interface and attempt to find the correct drivers. Compatible Product: VAG KKL 409.1 OBD2 USB Diagnostic Interface Cable 1. Go to and download the VCDS-Lite Software and the Drivers (CDM v2.08.30 WHQL Certified Windows Drivers) 2. Now plug the VAG-COM 409.1 USB cable into your PC. Always make sure there is good ventilation to prevent carbon monoxide poisoning.Ĭarbon monoxide fumes are produced by your engine’s exhaust gases.
SAFETY WARNING: Never start and run your engine inside of a closed garage.
0 kommentar(er)
